Omnidirectional Trasmitting Antennas - P1 7/16

zoom

Omnidirectional Trasmitting Antennas - P1 7/16

P1 7/16 - Omnidirectional Trasmitting Antennas

 

Immediate Quotation Technical Brochure

 

 

Anticorodal omnidirectional dipole, 87.5-108 MHz broadband, 2.15 dB gain. 7/16" connector. Includes mounting clamps and stainless steel accessories.


  • Broadband: Suitable for single channel or broadband operations with multi-channel combiners.
  • Easy Installation: The standard mounting brackets are designed for instant installation on poles with diameters from 32 to 90 mm. Special brackets are available upon request.
  • Water, icing, moisture protection: The input connector is protected against rain and icing by a special housing. The internal balun is also protected against water, icing and moisture by a sealed housing.
  • State of the art mechanical design: By employing the finest materials (stainless steel, non-corrosive aluminium alloy, marine brass, virgin PTFE) it is assured a longer life service.
  • Lightning resistance: is assured by the DC ground potential of the entire antenna.

Click on the photo to enlarge

 


 

  


 

 

 

Horizontal Pattern

 

Vertical Pattern

  

 

P1 7/16 - Technical parameters
Frequency range 87.5-108.0 MHz
Bandwidth Broadband
Polarization Vertical
Connector DIN 7/16"
Maximum Power Handling Capability 1.4 kW
Gain (at mid band, ref. to λ/2 dipole) 2.15 dB
VSWR (in the whole band) < 1.3 : 1
Impedance 50 ohm
   
Wind Load (ref 150 Km/h) 18 Kg (frontal), 26 Kg (lateral)
   
Grounding Via clamps
Vertical Beamwidth (at -3 dB, at mid band) 72°
   
Material Anodized Aluminium
Pole Diameter 32-90 mm (others on request)
Dimensions (HxWxD) 1430x40x840 mm